I would like to convert this code to VB.NET. Can someone help.
Thanks.
Dim X()
Dim i As Long
Dim objShell, objFolder, objFolderItem
Dim FSO, oFolder, Fil
Sub MainExtractData()
Dim NewSht As Worksheet
Dim MainFolderName As String
ReDim X(1 To 65536, 1 To 11)
Set objShell = CreateObject("Shell.Application")
Application.ScreenUpdating = False
MainFolderName = "c:\mydir"
Set NewSht = ThisWorkbook.Sheets.Add
X(1, 1) = "Path"
X(1, 2) = "File Name"
X(1, 3) = "Last Accessed"
X(1, 4) = "Last Modified"
X(1, 5) = "Created"
X(1, 6) = "Type"
X(1, 7) = "Size"
X(1, 8) = "Owner"
X(1, 9) = "Author"
X(1, 10) = "Title"
X(1, 11) = "Comments"
i = 1
Set FSO = CreateObject("scripting.FileSystemObject")
Set oFolder = FSO.GetFolder(MainFolderName)
On Error Resume Next
For Each Fil In oFolder.Files
Set objFolder = objShell.Namespace(oFolder.Path)
Set objFolderItem = objFolder.ParseName(Fil.Name)
i = i + 1
X(i, 1) = oFolder.Path
X(i, 2) = Fil.Name
X(i, 3) = Fil.DateLastAccessed
X(i, 4) = Fil.DateLastModified
X(i, 5) = Fil.DateCreated
X(i, 6) = Fil.Type
X(i, 7) = Fil.Size
X(i, 8) = objFolder.GetDetailsOf(objFolderItem, 8)
X(i, 9) = objFolder.GetDetailsOf(objFolderItem, 9)
X(i, 10) = objFolder.GetDetailsOf(objFolderItem, 10)
X(i, 11) = objFolder.GetDetailsOf(objFolderItem, 14)
Next
Call RecursiveFolder(oFolder)
Range("a1:K65536") = X
Range("A:K").EntireColumn.AutoFit
Set FSO = Nothing
Set objShell = Nothing
Set oFolder = Nothing
Set objFolder = Nothing
Set objFolderItem = Nothing
Set Fil = Nothing
Application.ScreenUpdating = True
End Sub
Sub RecursiveFolder(xFolder)
Dim SubFld
For Each SubFld In xFolder.SubFolders
Set oFolder = FSO.GetFolder(SubFld)
Set objFolder = objShell.Namespace(SubFld.Path)
For Each Fil In SubFld.Files
Set objFolder = objShell.Namespace(oFolder.Path)
If Not objFolder Is Nothing Then
Set objFolderItem = objFolder.ParseName(Fil.Name)
i = i + 1
X(i, 1) = SubFld.Path
X(i, 2) = Fil.Name
X(i, 3) = Fil.DateLastAccessed
X(i, 4) = Fil.DateLastModified
X(i, 5) = Fil.DateCreated
X(i, 6) = Fil.Type
X(i, 7) = Fil.Size
X(i, 8) = objFolder.GetDetailsOf(objFolderItem, 8)
X(i, 9) = objFolder.GetDetailsOf(objFolderItem, 9)
X(i, 10) = objFolder.GetDetailsOf(objFolderItem, 10)
X(i, 11) = objFolder.GetDetailsOf(objFolderItem, 14)
End If
Next
Call RecursiveFolder(SubFld)
Next
End Sub 2 10689
Martin,
The code is not that much different when you start.
However don't try to convert it.
Use new classes when they are there and use them in a way as they should.
Therefore not
Set oFolder = FSO.GetFolder(SubFld)
however something as
Dim myFileInfo as new FileInfo
(You do not need it probably in your program. The File class is
shared(static) so you can use that direct, on this page are links too a lot
more IO handling) http://msdn.microsoft.com/library/de...classtopic.asp
You don't need to use the instruction Call
Don't use the On Error; the Try and Catch block is very easy to use by
instance:
Try
Do what you have to do
Catch ex as exception 'the error is set in this ex object
Do your error handling
Finally
This is forever done as long that you don't power down
End Try
(You can nest it as well and than it becomes even more powerful)
Don't use the variable therefore no
Dim X() however at least
Dim X() as object ' but try to avoid declaring things as objects create
them as they are
Try to avoid the Redim, when you need that use than a more dynamic class as
the arraylist. http://msdn.microsoft.com/library/de...classtopic.asp
And as least don't forget to set in your options always "Option Strict On"
or set it in top of every program file that you use.
I hope this helps,
Cor
"Martin" <bm******@email.com>
.. I would like to convert this code to VB.NET. Can someone help.
Thanks.
Dim X() Dim i As Long Dim objShell, objFolder, objFolderItem Dim FSO, oFolder, Fil
Sub MainExtractData()
Dim NewSht As Worksheet Dim MainFolderName As String
ReDim X(1 To 65536, 1 To 11)
Set objShell = CreateObject("Shell.Application")
Application.ScreenUpdating = False MainFolderName = "c:\mydir" Set NewSht = ThisWorkbook.Sheets.Add
X(1, 1) = "Path" X(1, 2) = "File Name" X(1, 3) = "Last Accessed" X(1, 4) = "Last Modified" X(1, 5) = "Created" X(1, 6) = "Type" X(1, 7) = "Size" X(1, 8) = "Owner" X(1, 9) = "Author" X(1, 10) = "Title" X(1, 11) = "Comments"
i = 1
Set FSO = CreateObject("scripting.FileSystemObject") Set oFolder = FSO.GetFolder(MainFolderName) On Error Resume Next For Each Fil In oFolder.Files Set objFolder = objShell.Namespace(oFolder.Path) Set objFolderItem = objFolder.ParseName(Fil.Name)
i = i + 1 X(i, 1) = oFolder.Path X(i, 2) = Fil.Name X(i, 3) = Fil.DateLastAccessed X(i, 4) = Fil.DateLastModified X(i, 5) = Fil.DateCreated X(i, 6) = Fil.Type X(i, 7) = Fil.Size X(i, 8) = objFolder.GetDetailsOf(objFolderItem, 8) X(i, 9) = objFolder.GetDetailsOf(objFolderItem, 9) X(i, 10) = objFolder.GetDetailsOf(objFolderItem, 10) X(i, 11) = objFolder.GetDetailsOf(objFolderItem, 14) Next
Call RecursiveFolder(oFolder) Range("a1:K65536") = X Range("A:K").EntireColumn.AutoFit Set FSO = Nothing Set objShell = Nothing Set oFolder = Nothing Set objFolder = Nothing Set objFolderItem = Nothing Set Fil = Nothing Application.ScreenUpdating = True End Sub
Sub RecursiveFolder(xFolder) Dim SubFld For Each SubFld In xFolder.SubFolders Set oFolder = FSO.GetFolder(SubFld) Set objFolder = objShell.Namespace(SubFld.Path) For Each Fil In SubFld.Files Set objFolder = objShell.Namespace(oFolder.Path) If Not objFolder Is Nothing Then Set objFolderItem = objFolder.ParseName(Fil.Name) i = i + 1 X(i, 1) = SubFld.Path X(i, 2) = Fil.Name X(i, 3) = Fil.DateLastAccessed X(i, 4) = Fil.DateLastModified X(i, 5) = Fil.DateCreated X(i, 6) = Fil.Type X(i, 7) = Fil.Size X(i, 8) = objFolder.GetDetailsOf(objFolderItem, 8) X(i, 9) = objFolder.GetDetailsOf(objFolderItem, 9) X(i, 10) = objFolder.GetDetailsOf(objFolderItem, 10) X(i, 11) = objFolder.GetDetailsOf(objFolderItem, 14) End If Next Call RecursiveFolder(SubFld) Next End Sub This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Lauren Quantrell |
last post by:
I have a stored procedure using Convert where the exact same Convert
string works in the SELECT portion of the procedure but fails in the
WHERE portion.
The entire SP is listed below....
|
by: Logan X via .NET 247 |
last post by:
It's official....Convert blows.
I ran a number of tests converting a double to an integer usingboth Convert & CType. I *ASSUMED* that CType would piggy-back ontop of Convert, and that performance...
|
by: Eric Lilja |
last post by:
Hello, I've made a templated class Option (a child of the abstract base
class OptionBase) that stores an option name (in the form someoption=) and
the value belonging to that option. The value is...
|
by: whatluo |
last post by:
Hi, all
I'm now working on a program which will convert dec number to
hex and oct and bin respectively, I've checked the clc but with no
luck, so can anybody give me a hit how to make this done...
|
by: Convert TextBox.Text to Int32 Problem |
last post by:
Need a little help here. I saw some related posts, so here goes... I have some textboxes which are designed for the user to enter a integer value. In "old school C" we just used the atoi function...
| |
by: patang |
last post by:
I want to convert amount to words. Is there any funciton available?
Example:
$230.30
Two Hundred Thirty Dollars and 30/100
|
by: Edwin Knoppert |
last post by:
In my code i use the text from a textbox and convert it to a double value.
I was using Convert.ToDouble() but i'm used to convert comma to dot.
This way i can assure the text is correct.
However...
|
by: johnlim20088 |
last post by:
Hi,
Currently I have 6 web projects located in Visual Source Safe 6.0, as usual, everytime I will open solution file located in my local computer, connected to source safe, then check out/check in...
|
by: Ken Fine |
last post by:
This is a basic question. What is the difference between casting and using
the Convert.ToXXX methods, from the standpoint of the compiler, in terms of
performance, and in other ways? e.g.
...
|
by: Debadatta Mishra |
last post by:
Introduction
In this article I will provide you an approach to manipulate an image file. This article gives you an insight into some tricks in java so that you can conceal sensitive information...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However,...
| |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing,...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated ...
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |